Energy Rating: B

2 Year Manufacturer's Parts & Labour Warranty

SKU ED851FQ15E Categories , ,
Brands: Siemens
Brands

Siemens ED851FQ15E iQ500 80cm Black Venting Induction hob with integrated ventilation system

Free 2 Man Delivery - Some Postcode Exceptions

Flexible Delivery Dates

Recycle Old Appliance

Guaranteed UK's Best Price

Description

Siemens ED851FQ15E iQ500 80cm Black Venting Induction hob with integrated ventilation system

Induction hob with integrated ventilation unit.

  • The touchSlider allows the hob temperature to be controlled by entering it directly or by moving the slider with a single finger.
  • Shorter heating times with up to 50% more power thanks to the powerBoost function.
  • Powerful motor with a high extraction rate of up to 690 m³/h for fresh air in your kitchen.
  • Timer with cooking zone shut-off function
  • The child safety lock safely prevents unintentional switch-on.

touchSlider

Temperature control without knobs or dials: touchSlider control.

Our innovative touchSlider technology allows you to control the temperature of the cooking zones either by directly tapping the operating scale or sliding your finger along it. Sensor-based heat regulation takes place in half levels up to the maximum setting of 9.

powerBoost function

The turbocharger for powerInduction: powerBoost function.

The powerBoost function increases power by up to 50 %. This can save up to 35 % of the time it takes to heat up pots or cook large quantities.

Timer with cooking zone shut-off function

Timer with cooking zone shut-off function

The timer with switch-off function safely shuts off the cooking zone when the selected cooking time expires.

child safety lock

Hazards are eliminated: the childproof lock.

With the childproof lock button, you can quickly and easily protect each induction hob against unauthorised operation. The childproof lock blocks all the hob’s functions at the touch of a button. Locking is cleared by pressing the button again and holding down for a few seconds.

Induction

Fast, safe, and easy to clean: powerInduction from Siemens.

Instantly hot. Instantly cold. Experience the benefits of Siemens powerInduction. Heat is conducted directly to the pans and their contents via induction coils, without heating the hob. What this means for you: heat-up times are short, safety is increased and the hob is much easier to clean.

touchSlider control
3 sided bevelled frameless finish
4 induction cooking zones
2 Combi zones
MoveMode: 2-steps
reStart function
quickStart function
Timer for all zones Acoustic signal
17 power levels
Automatic pan recognition Automatic safety switch off Control panel lock Control panel pause
2 stage residual heat indicators
Main on/off switch
Energy Consumption Display
Power boost setting
Cooking zones: 1 x 380 mm x 210 mm, 3.6 KW Induction or 2 x 190 mm, 210 mm, 2.2 KW (max. power 3.7 KW) Induction; 1 x 380 mm x 210 mm, 3.6 KW Induction or 2 x 190 mm, 210 mm , 2.2 KW (max power 3.7 KW) Induction
Installation dimensions: (ID/W/D) 223 mm x 750 mm x 490 mm
Appliance dimensions: (W/D) 802 mm x 522 mm
Suitable for installation into a 60 cm base cabinet
Min. worktop thickness: 16 mm (Installation in thinner worktops is also possible with the spare part: 626792)
Length wire connection: 110 cm
Cable included in packaging
Connected load: 7.4 KW
Induction cooktop with fully integrated high-performance downdraft extractor.
Suitable for ducted or recirculated extraction configuration (incl. differentiated software modes). Respective mandatory installation accessories required:  – HZ9VEDU0 for ducted extraction. – Starter kit HZ9VRUD0 for unducted recirculation with cleanAir odour filters. – HZ9VRPD0 for fully ducted and partly-ducted recirculation with cleanAir odour filters.
– HZ9VEDU0 for ducted extraction.
– HZ9VRPD0 for fully ducted and partly-ducted recirculation with cleanAir odour filters. Starter kit HZ9VRUD0 for unducted recirculation with cleanAir odour filters.
Aesthetically integrated fully flush air intake design with floating, heat resistant glass ceramics element for free movement and placement of cookware.
Ventilation system with 9 electronically controlled fan power levels and 2 Boost-/Intensive fan power levels (with automatic revert) via touchSlider control user interface:  – Automatic switch-on of ventilation system when a cooking zone is used. – Automatic delayed shut-off after cooking to erase residual odors after cooking (in specific ultra low-noise fan level, 12min in ducted extraction, 30min in recirculated extraction, can be shut-off manually).  – Fully manual control possible via touchSlider control.
– Automatic switch-on of ventilation system when a cooking zone is used.
– Automatic delayed shut-off after cooking to erase residual odors after cooking (in specific ultra low-noise fan level, 12min in ducted extraction, 30min in recirculated extraction, can be shut-off manually).
– Fully manual control possible via touchSlider control.
High-performance, low-noise motor with energy-efficient BLDC-technology. High extraction rates at very low noises with pleasant noise frequencies through psycho-acoustically and aerodynamically optimised interior with enclosed, hidden motor. Highly pressure-drop resistant even with longer and more complex ducting systems.
Easy-to-detach and easy-to-clean grease filter and liquid collector unit: – Convenient one-hand removal of unit via floating glass ceramics handle. – Integrated, large-scale, high performance stainless-steel grease filters with 12 filtration layers and one black top layer for enhanced aesthetical integration. Grease filtration efficiency of 94 %.  – All parts of the unit are easy-to-clean, fully dishwasher safe and heat resistant.  – (Upper) Liquid collector unit with 200ml of capacity for standard accidental spillages or cooking condensate. – Powerful drainage system for spillages that exceed 200ml of liquids. – Liquid safety collector with additional capacity of 700ml for more severe accidental situations. Dishwasher safe. Easily accessible and detachable from below.  – Overall capturing capacity of 900ml (200ml + 700ml). – Watertight motor system.
– Convenient one-hand removal of unit via floating glass ceramics handle.
– Integrated, large-scale, high performance stainless-steel grease filters with 12 filtration layers and one black top layer for enhanced aesthetical integration. Grease filtration efficiency of 94 %.
– All parts of the unit are easy-to-clean, fully dishwasher safe and heat resistant.
– (Upper) Liquid collector unit with 200ml of capacity for standard accidental spillages or cooking condensate.
– Powerful drainage system for spillages that exceed 200ml of liquids.
– Liquid safety collector with additional capacity of 700ml for more severe accidental situations. Dishwasher safe. Easily accessible and detachable from below.
– Overall capturing capacity of 900ml (200ml + 700ml).
– Watertight motor system.
Ventilation system performance: – Extraction performance in ducted extraction (according to EN 61591): min. normal setting 154 MQH , max. normal setting 500 MQH, max. Boost-/Intensive setting 622 MQH. – Extraction performance in recirculated extraction (according to EN 61591): min. normal setting 150 m3/h , max. normal setting 500 m3/h , max. Boost-/Intensive setting 615 m3/h. – Noise level in ducted extraction (Sound power level according to EN 60704-3): min. normal setting 42 dB re 1 pW, max. normal setting 69 dB re 1 pW, max. Boost-/Intensive setting 74 dB re 1 pW. – Noise level in recirculated extraction (Sound power level according to EN 60704-3. ): min. normal setting 41 dB re 1 pW, max. normal setting 68 dB re 1 pW, max. Boost-/Intensive setting 72 dB re 1 pW. – Grease filter efficiency (according to EN 61591) 94 %. All performance data is preliminary and based on latest test results with advanced prototypes and will be updated with tests from final products.
– Extraction performance in ducted extraction (according to EN 61591): min. normal setting 154 m3/h , max. normal setting 500 m3/h , max. Boost-/Intensive setting 622 m3/h .
– Extraction performance in recirculated extraction (according to EN 61591): min. normal setting 150 m3/h , max. normal setting 500 m3/h , max. Boost-/Intensive setting 615 m3/h.
– Noise level in ducted extraction (Sound power level according to EN 60704-3): min. normal setting 42 dB  re 1 pW, max. normal setting 69 dB  re 1 pW, max. Boost-/Intensive setting 74 dB  re 1 pW.
– Noise level in recirculated extraction (Sound power level according to EN 60704-3. ): min. normal setting 41 dB  re 1 pW, max. normal setting 68 dB  re 1 pW, max. Boost-/Intensive setting 72 dB  re 1 pW.
– Grease filter efficiency (according to EN 61591) 94 %.
All performance data is preliminary and based on latest test results with advanced prototypes and will be updated with tests from final products.
Consumption data and energy efficiency (according to Regulation (EU) No 65/2014): – Energy Efficiency Class: B (at a range of energy efficiency classes from A+++ to D). – Fluid Dynamic Efficiency: A .    – Average energy consumption: 57 . – Grease filtration effciency class: B . – Noise min. normal setting & max. normal setting: 42 dB & 69 dB .
– Energy Efficiency Class: B (at a range of energy efficiency classes from A+++ to D).
– Fluid Dynamic Efficiency: A .
– Average energy consumption: 57 .
– Grease filtration effciency class: B .
– Noise min. normal setting & max. normal setting: 42 dB  & 69 dB .
2 x 2 sets of directly integrated, high-performance cleanAir odour filters (in recirculation configuration). – Optimised odour reduction performance for cooking applications with complex odour molecules (e.g. fish). – Large scale filter surface with high odour reduction capabilities. – Lifetime of 360 hours of cooking (non-regenerative).    – Low-noise filters with optimised psycho-acoustics. – Easy-to-access and easy-to-remove from above. – Replenishment cleanAir filter set HZ9VRCR0. For ducted extraction configuration: 2 x 2 sets of directly integrated, high-performance low-noise acoustic filters for significantly lower noise and improved psycho-acoustics.
– Optimised odour reduction performance for cooking applications with complex odour molecules (e.g. fish).
– Large scale filter surface with high odour reduction capabilities.
– Lifetime of 360 hours of cooking (non-regenerative).
– Low-noise filters with optimised psycho-acoustics.
– Easy-to-access and easy-to-remove from above.
– Replenishment cleanAir filter set HZ9VRCR0.
For ducted extraction configuration: 2 x 2 sets of directly integrated, high-performance low-noise acoustic filters for significantly lower noise and improved psycho-acoustics.
Suitable for ducted or recirculated extraction configuration (incl. differentiated software modes). Respective mandatory installation accessories required:  – HZ9VEDU0 for ducted extraction. – Starter kit HZ9VRUD0 for unducted recirculation with cleanAir odour filters. – HZ9VRPD0 for fully ducted and partly-ducted recirculation with cleanAir odour filters.
– HZ9VEDU0 for ducted extraction.
– HZ9VRPD0 for fully ducted and partly-ducted recirculation with cleanAir odour filters. Starter kit HZ9VRUD0 for unducted recirculation with cleanAir odour filters.
Planning suggestions: – Installation is possible in island as well as wall oriented configurations. – The product complies with the Needle Flame Test (according to IEC 60695-5-11), the V2 flammability class (according to UL94) and the B1 building material class (DIN 4102-1). The starter kit HZ9VRUD0 for unducted recirculation complies with these standards as well. – The max. immersion depth is 223mm below glass for top mounted appliances and 227mm for flush installed appliances.  – The appliance must be freely accessible from below (i.e. for accessing the lower liquid safety collector). – No false floor is necessary below the cooktop with integrated downdraft ventilation system. The drawers and/or shelves in the floor unit must be removable. The backpanel of the floor unit can be kept – only a cut-out for the air outlet is needed (position and size can be taken from the installation instructions). – The “Plug ‘n Play” starter kit HZ9VRUD0 for unducted recirculation requires a vertical aperture of min. 25mm behind the backpanel of the furniture. Suggested for ideal performance are 50mm. – The minimum worktop thickness is 16mm for top mounted and flush installed appliances with the standard installation system. Installation in even thinner worktops is also possible with the spare part: content 626792.  – The overall appliance weight is 26kg – the bearing capacity and stability, in the case of very thin worktops in particular, must be supported using suitable substructures. The overall appliance weight and the worktop manufacturer’s structural integrity specifications are to be taken into account. – The “Plug ‘n Play” starter kit HZ9VRUD0 for unducted recirculation enables easy and quick installations and can be planned in all worktop depths ≥60cm. For ducted installations – in ducted extraction (HZ9VEDU0) as well as fully or partly ducted recirculation (HZ9VRPD0) – a worktop depth of ≥70cm is required.  – For partly ducted and unducted recirculation extraction installations, a return-flow aperture of ≥400cm² is to be respected in the plinth area. The aperture can be realized via outlet grids, lamella grids or subtly shortened plinths depending on the assortment of the kitchen furniture manufacturer.  – The air outlet on the backside of the appliance can directly be accessed with a male flat duct element (DN 150).  – The pressuredrop resistant blower allows longer and more complex ductings up to 8m with three 90° bows while keeping sufficient performance. – When installing a ventilation hood with ducted extraction and a chimney-vented fireplace, the power supply line of the appliance needs a suitable safety switch. This is not required for configurations in recirculated extraction. –  In ducted extraction configuration a one-way flap (or backflow trap) with a maximum opening pressure of 65Pa should be installed.
– Installation is possible in island as well as wall oriented configurations.
– The product complies with the Needle Flame Test (according to IEC 60695-5-11), the V2 flammability class (according to UL94) and the B1 building material class (DIN 4102-1). The starter kit HZ9VRUD0 for unducted recirculation complies with these standards as well.
– The max. immersion depth is 223mm below glass for top mounted appliances and 227mm for flush installed appliances.
– The appliance must be freely accessible from below (i.e. for accessing the lower liquid safety collector).
– No false floor is necessary below the cooktop with integrated downdraft ventilation system. The drawers and/or shelves in the floor unit must be removable. The backpanel of the floor unit can be kept – only a cut-out for the air outlet is needed (position and size can be taken from the installation instructions).
– The “Plug ‘n Play” starter kit HZ9VRUD0 for unducted recirculation requires a vertical aperture of min. 25mm behind the backpanel of the furniture. Suggested for ideal performance are 50mm.
– The minimum worktop thickness is 16mm for top mounted and flush installed appliances with the standard installation system. Installation in even thinner worktops is also possible with the spare part: content 626792.
– The overall appliance weight is 26kg – the bearing capacity and stability, in the case of very thin worktops in particular, must be supported using suitable substructures. The overall appliance weight and the worktop manufacturer’s structural integrity specifications are to be taken into account.
– The “Plug ‘n Play” starter kit HZ9VRUD0 for unducted recirculation enables easy and quick installations and can be planned in all worktop depths ≥60cm. For ducted installations – in ducted extraction (HZ9VEDU0) as well as fully or partly ducted recirculation (HZ9VRPD0) – a worktop depth of ≥70cm is required.
– For partly ducted and unducted recirculation extraction installations, a return-flow aperture of ≥400cm² is to be respected in the plinth area. The aperture can be realized via outlet grids, lamella grids or subtly shortened plinths depending on the assortment of the kitchen furniture manufacturer.
– The air outlet on the backside of the appliance can directly be accessed with a male flat duct element (DN 150).
– The pressuredrop resistant blower allows longer and more complex ductings up to 8m with three 90° bows while keeping sufficient performance.
– When installing a ventilation hood with ducted extraction and a chimney-vented fireplace, the power supply line of the appliance needs a suitable safety switch. This is not required for configurations in recirculated extraction.
–  In ducted extraction configuration a one-way flap (or backflow trap) with a maximum opening pressure of 65Pa should be installed.

Additional information

Brand

Colour

Fuel Type

Product Type

, ,

Warranty

Width Category

Zones/ Burners