Faber 110.0357.341 Victory 2.0 built-in/integral canopy hood
The Victory 2.0 is a stylish built in canopy hood. Available in 3 different widths, the Victory 2.0 can suit most hob sizes to provide high quality Faber perimeter extraction.
Featuring a stainless steel outer body that fits seamlessly into kitchen cabinets. The Victory 2.0 has 2 LED lights to illuminate the hob area below and is supplied with a handy remote control.
The Victory 2.0 motor has the ability to be ducted from 4 different positions making it a versatile integrated hood. The Victory is also available in recirculating mode when purchased with the recommended charcoal filters.
|Air Capacity (m³h)
|Noise Level (db)
||VICTORY 2.0 X A99
||4 LED Lights
||Cassettes Dishwasher Safe
|Ø of duct size
||150 / 120 mm
DELAYED SWITCH OFF
The delayed switch off function allows the motor to automatically switch off 30 minutes after cooking has finished to complete elimination of residual odours
The ENERGY motor reduces noise output by up to 3dB (A) and increases hood efficiency by 30% even in the presence of long ducting
FILTER SATURATION ALARM
The filter saturation alarm warns you when it is time to clean the anti-grease filter or replace the charcoal filter
This function allows the hood to be switched on for 24 hours a day for continuous air renewal with an imperceptible noise level
The Intensive Speed function activates maximum extraction for 6 minutes to meet special cooking needs and clean odours quickly
The LED hood light lights the hob area below with only 3 Watts of energy consumption
The perimeter extraction panel reduces the perceived sound by 25% (which is equal to a reduction of 3dB). This method of extraction guarantees optimised effectiveness by exploiting the principle of the Venturi effect: air accelerates as it passes through the constricted extraction space of the panel and decreases immediately inside the hood and is then easily expelled without the need for any particular pressure levels
REMOTE BLOWER KIT (OPTIONAL)
The optional remote blower kit allows the hood motor to be be removed and installed elsewhere within the home, thus freeing it from any architectural constraints and reducing the noise output within the kitchen
The remote control will activate the different functions of the hood