Faber 110.0315.503 Heaven Glass 2.0 Extractor
The Heaven Glass 2.0 is a stunning example of a built-in ceiling mounted cooker hood. Perfect for an island kitchen design, the Heaven Glass 2.0 frees up valuable space in the kitchen.
With a seamless white glass finish and LED strip lights, the Heaven Glass 2.0 is a beautiful yet discreet addition to the Faber range of ceiling cooker hoods. The Heaven glass is supplied with a remote control and can be used in recirculating mode with the addition of charcoal filters.
The Heaven Glass 2.0 can be used with a remote blower kit which allows the existing hood motor to be removed and located elsewhere within the property, allowing the Heaven Glass 2.0 to be installed easier within the ceiling.
|Air Capacity (m³h)
|Noise Level (db)
||HEAVEN GLASS 2.0 WH EV8+ A90
||2 LED Lights
||Cassettes Dishwasher Safe
|Ø of duct size
||150 / 120 mm
DELAYED SWITCH OFF
The delayed switch off function allows the motor to automatically switch off 30 minutes after cooking has finished to complete elimination of residual odours.
An evolved version of the ENERGY motor, the EVO motor has an optimised geometry that yields excellent results in terms of energy efffiency, reduced power levels and reduced noise levels thanks to in-depth fluid dynamics studies.
FILTER SATURATION ALARM
The filter saturation alarm warns you when it is time to clean the anti-grease filter or replace the charcoal filter.
This function allows the hood to be switched on for 24 hours a day for continuous air renewal with an imperceptible noise level.
The Intensive Speed function activates maximum extraction for 6 minutes to meet special cooking needs and clean odours quickly.
The LED hood light lights the hob area below with only 3 Watts of energy consumption.
The perimeter extraction panel reduces the perceived sound by 25% (which is equal to a reduction of 3dB). This method of extraction guarantees optimised effectiveness by exploiting the principle of the Venturi effect: air accelerates as it passes through the constricted extraction space of the panel and decreases immediately inside the hood and is then easily expelled eithout the need for any particular pressure levels.
The remote control will activate the different functions of the hood
HOOD & HOB CONNECTION
The hood is linked to the hob due to controls integrated into Faber hobs